| Articles for Print Servers | |||
|---|---|---|---|
| # | Title | Summary | Updated |
| 5 | Slow First Printed Page Out on HP LaserJet Printers | My f... | 04-12-2006 |
| 7 | LPR / LPD Printing from Windows 2000 / 2003/ XP | I-O Print Ser... | 06-15-2006 |
| 8 | How to assign a static IP address to an IO Print Server | Instructions for assigning a static IP address to an I-O Print Server.... | 04-10-2006 |
| 9 | Finishing feature support for Canon printers | The I-O 5435DP/5735DP/5755DP do not emulate a 4324 IBM printer. Our emul... | 02-13-2006 |
| 10 | Generating a Data Capture from Print Control Utility | Instructions for generating a Data Capture from any I-O Print Server (PS... | 02-16-2006 |
| 11 | Generating a Data Capture with Configuration Utility | Datacapture Instructions. 1. Make sure no one else will be using the pr... | 02-16-2006 |
| 12 | Printing from Windows 95 or Windows 98 using I-O's Direct Port | Configuring I-O TCP/IP Direct Port(TM) Printing for Windows 95/98 The... | 02-17-2006 |
| 13 | Required open ports for WAN / VPN printing | In order to remotely configure and control an I-O IPDS PrintServer, rout... | 02-18-2006 |
| 14 | Anynet printer won't vary on | I have configured a printer using the Anynet protocol, everything config... | 02-18-2006 |
| 15 | Generating an Ethereal Line Trace | Ethereal Line Trace Utility Ethereal is an open source software program... | 02-18-2006 |
| 16 | Restoring Factory Defaults on an I-O Print Server | To reset the Print Server (PS) to Factory Defaults, do the following: ... | 02-14-2006 |
| 17 | Extra page prints with one line of junk characters. | Why does my IPDS printer print an extra page at the end of a job with a ... | 02-18-2006 |
| 18 | How to Upgrade the Firmware in a Print Server | How c... | 04-11-2006 |
| 23 | What ports must be open to print from Windows XP SP2 ? | On the XP firewall the Daytime port 13 and the LPR port 515 must be open... | 02-17-2006 |
| 24 | Matrix printer form length problem. | I am having problems getting my matrix printer to top of form properly. ... | 02-18-2006 |
| 25 | Changing my IP address scheme. | Why, when I am changing my IP addressing scheme, can I no longer see my ... | 02-17-2006 |
| 26 | Will the 5435e drive an HP 4SI printer? | Will the 5435e drive an HP 4SI printer as an IPDS device from the AS/400... | 02-17-2006 |
| 27 | Checking the AS/400 system values | 00-00-0000 | |
| 300 | PCL tray numbers for the Kyocera Mita 3820N | The following link will provide the PCL tray numbers assigned by the Kyo... | 02-17-2006 |
| 302 | Why does my printed output change a capital V into a capital U ? | An error in the firmware resulted in a capital V being printed as a ca... | 06-19-2006 |
| 304 | What PCL number is assigned to my physical paper tray? | The following link shows various printer's physical trays and the PCL ... | 10-05-2006 |
| 305 | On my printer, what PCL numbers are associated with my physical tray number | The following link shows input PCL tray numbers for a variety of printer... | 02-17-2006 |
| 306 | Total junk output from our print server configuration report / test page. | A customer's 5430e would print total junk to an Epson DFX printer. Even ... | 02-17-2006 |
| 308 | Maximum parallel cable length | I-O's Print Servers (PS) may cause junk or unexpected output when using ... | 02-18-2006 |
| 309 | Timing of the forms alignment message when using the LRPC. | For times when the forms alignment message comes well into, if not after... | 02-17-2006 |
| 310 | Why does my IBM font look slightly different than my Canon output? | IBM font's appear slightly thicker and darker than fonts used when print... | 02-18-2006 |
| 311 | Do the IPDS settings affect AS/400 & Mainframe (3270) IPDS output? | Inside the Configuration Utility (CU) tab, the settings / variables sele... | 02-17-2006 |
| 312 | Fw 4.60 & CU 4.61 now allows disabling of Telnet autoconfig. | With the release of Firmware version 4.60 and Configuration Utility (CU)... | 02-17-2006 |
| 313 | Xon Xoff flow control problems on the 405 platform (version 4.6x) | Xon / Xoff flow control is not supported in I-O Print Servers based on t... | 02-18-2006 |
| 317 | Constant printer error being reported. | A recent customer using an I-O 57xx Gateway product was constantly being... | 02-17-2006 |
| 322 | Multiple bin support for dot matrix printers | How do I get my matrix printer to feed from multiple paper bins? I-O'... | 02-15-2006 |
| 326 | Configuring SMB for Canon Printers | To connect an I-O Gateway Print Server to a Canon imageRUNNER models 330... | 02-14-2006 |
| 329 | Winsoc errors | The following link will show you various winsock (Windows Socket) errors... | 02-17-2006 |
| 334 | Why does my outque change back to system defaults? | The Telnet (TN5250e) protocol auto configures devices and when devices... | 03-07-2007 |
| 336 | Why is my 5755e showing as a single device Print Server? | A customer using an I-O 5755DP (3 printer port unit)with a Firmware leve... | 02-13-2006 |
| 338 | Why am I only printing 17.1 cpi? | Using an I-O 5430e with a dot-matrix printer and TN5250e protocol, a cus... | 02-14-2006 |
| 340 | Extremely slow printing | A customer reported his 5755DP had been printing fine for a number of mo... | 02-15-2006 |
| 341 | Xon Xoff support | Due to a chip difference between platforms the following Xon/Xoff suppor... | 02-17-2006 |
| 342 | Xon Xoff support of flow control. | Due to the lack of X-On/X-Off flow control support in a chip (IC) used t... | 02-18-2006 |
| 350 | Does my 5435e have 4M or 8M RAM? | All 5435e's with a s/n equal to or greater than 8104370 have 8M RAM. ... | 02-01-2006 |
| 351 | My IPDS Printer writer will not start. | A customer with three different I-O IPDS PrintServers, printing to four ... | 02-27-2006 |
| 353 | Why does my Anynet printer not vary on? | The customers Anynet controller and printer configured as expected, but ... | 03-06-2006 |
| 354 | Why do my LRPC mode lights flash after responding to a message? | A customer with a LRPC and an IBM 6400 could make the I-O LRPC go into a... | 03-06-2006 |
| 359 | Why am I losing my printers after an IPL ? | In the printers device description make sure the parameter Online at I... | 03-09-2006 |
| 364 | Upgrading OS on the iSeries - AS/400 creates printing problems | A customer driving printers using Telnet on the 400 recently upgraded to... | 03-20-2006 |
| 371 | Printing IPDS jobs to a dot matrix printer thru an IPDS print server | IPDS print jobs cannot be printed on a dot matrix printer via any of the... | 03-30-2006 |
| 373 | Where to find the current revision of the configuration utility. | The current revision of the configuration utility can be downloaded from... | 04-03-2006 |
| 377 | Do I use 1B or < when redefing Fonts? | When redefining fonts using an I-O PrintServer the escape character is... | 04-27-2006 |
| 378 | AIX implementation | IPDS... | 04-19-2006 |
| 379 | 9-Pin vs 25-Pin Serial Ports | The 5431B has a 25 pin (DB25 male) serial port. The 5450e has a 9 pin... | 04-27-2006 |
| 390 | IPDS, PCL & Edge-to-Edge Printing | <... | 10-25-2006 |
| 398 | How to add ports to my PC running XP/SP2 | When installing the I-O Configuration Utility and configuring an I-O p... | 10-26-2006 |
| 402 | Manheim Auto Auction - 5430e & Printek Setup to correct a 10 cpi issue | The proper settings for the I-O 5430e when used with Printek dot-matri... | 10-26-2006 |
| 404 | Zebra label printer receives data but nothing prints | Zebra label printers use a specific language called ZPL to print a lab... | 12-18-2006 |
| 439 | 3235-062 SCS Printing Support | The 3235-062 USB ba... | 02-08-2007 |
| 445 | "49.460E" Service Error after installing MHP on a "minimum-memory model" pr | After installing MHP on a "minimum-memory model" printer (e.g.... | 00-00-0000 |
| 446 | IPDS performance when using a new printer or a new JetDirect may be poor | This is caused by the default JetDirect settings. Significant improvem... | 06-28-2007 |
| 449 | Printing a LaserJet Configuration Page with some Third Party Solutions | If you do not get the Jet-Direct card status page when you print the con... | 06-28-2007 |
| 450 | Printing certain IPDS jobs with an Unlicensed MHP may cause IP issues | This issue can be resolved by obtaining a License for the MHP Solution... | 09-14-2007 |
| 465 | Unable to print from Windows Vista | If you are unable to print to a Windows Vista printer, you will need t... | 11-20-2007 |
| 466 | How can I get 3 bin support on a Printek printer? | Printi... | 11-20-2007 |
| 468 | Stop a Canon printer from stapling every job | Some Canon printers may staple every job even though the host or print... | 02-11-2008 |
| 470 | Firewall Information for Print Server |
The following ports need to be open: Ping LPD on port 515 02-27-2008 | |
| 487 | RGB Color Coordinates | I-O's SCS Printer Emulation includes the I-O Color Scripting Commands.... | 04-02-2008 |