| Articles for LAN to Twinax | |||
|---|---|---|---|
| # | Title | Summary | Updated |
| 61 | What is the normal power-on LED sequence for the LRPC? | LANRPC (LRCP) Normal Startup LED Sequence: 1. Before power up al... | 02-18-2006 |
| 67 | Will my LRPC driving an IPDS printer, print from Windows? | No. Windows will not source the IPDS data stream as required by the pri... | 03-16-2006 |
| 98 | Coax IPDS printer attached to the LRPC consistently stops printing | The LRPC driving my Coax IPDS printer will print small jobs just fine. H... | 02-18-2006 |
| 215 | Printing from two paper sources with an IPDS dot-matrix printer. | A customer was unable to print on two different paper sizes from two dif... | 02-17-2006 |
| 284 | What Twinax address should I use? | The LRPC connects to only one Twinax or Coax printer. When driving a Twi... | 02-17-2006 |
| 286 | Using the LRPC to print from Windows | When printing from Windows to a non-IPDS, LRPC attached Twinax printer, ... | 02-18-2006 |
| 318 | Form length with LRPC attached Twinax printers | When connected via Twinax, the AS/400 queries the IPDS printer about the... | 02-15-2006 |
| 331 | Why does my IPDS LRPC attached printer, print one line or less? | When driving an actual IPDS printer via an I-O LanRPC (LRPC), the physic... | 02-18-2006 |
| 339 | Mixing printers and hosts | Coax or Twinax IPDS printers, driven by an I-O LRPC can be driven from A... | 02-17-2006 |
| 354 | Why do my LRPC mode lights flash after responding to a message? | A customer with a LRPC and an IBM 6400 could make the I-O LRPC go into a... | 03-06-2006 |
| 371 | Printing IPDS jobs to a dot matrix printer thru an IPDS print server | IPDS print jobs cannot be printed on a dot matrix printer via any of the... | 03-30-2006 |
| 372 | Printing to a IPDS 5224 via LANRPC | Some old... | 04-19-2006 |
| 373 | Where to find the current revision of the configuration utility. | The current revision of the configuration utility can be downloaded from... | 04-03-2006 |
| 381 | LRPC and printer power on sequence | Power on the LRPC and wait for the LRPC to finish the boot sequence. ... | 04-27-2006 |
| 398 | How to add ports to my PC running XP/SP2 | When installing the I-O Configuration Utility and configuring an I-O p... | 10-26-2006 |