IBM Connectivity ProEdge Thin Clients Security Solutions
 Search
You are here: Home Page > Support > I-O Knowledgebase
Articles for Twinax/Coax Printer Interfaces
#TitleSummaryUpdated
33TxS & 8215 Serial cables and printingMy 8215 prints can talk to and print from more than one printer, yet my ...02-17-2006
37TxP+ TxPlite TxS+ Switch settingsThe following link will show the various switch settings for the TxP+, T...05-24-2006
38What are the switch settings for the CxP+, CxPLite and CxS+ ?The following link will define the switch settings for the CxP+, CxPlite...02-17-2006
39IPDS fonts, 3812 vs 40284028 fonts are designed as 300 pel (dots per inch) fonts. 3812 fonts ar...02-18-2006
728220 Switch SettingsThe switch settings for the 8220 can be accessed by following the link :...02-17-2006
734465 Switch SettingsThe switch settings for the 4465 can be accessed by following the link :...02-18-2006
748315 Switch SettingsThe switch settings for the 8315 can be accessed by following the link :...02-17-2006
758216 Switch SettingsThe switch settings for the 8216 can be accessed by following the link :...02-18-2006
87Are the 8300 and 8320 interchangable?No, the 8300 is designed for Epson printers with the Epson designed and ...02-17-2006
898029 Switch SettingsThe following link will define the various switch settings for the I-O 8...02-18-2006
908200 Switch SettingsThe following link will define the various switch settings for the I-O 8...02-12-2006
918216 Switch SettingsThe following link will define the various switch settings for the I-O 8...02-18-2006
928220 Switch SettingsThe following link will define the various switch settings for the I-O 8...02-18-2006
994260 works fine in HP4, 4000 and 5000, but fails in the HP5100 & 3700 printMy I-O 4260 has worked perfectly fine for quite some time in my HP4, HP4...02-13-2006
250Single character Command Pass Thru delimiterCan a single character be used as the beginning or ending Command Pass T...02-15-2006
2688300 Switch settingsThe following link will define the various switch settings for the I-O 8...02-18-2006
281Will the 4465 autoconfig a device on the AS/400?Yes, the 4465 will autoconfigure a device on the AS/400 if the Host syst...02-17-2006
283Does the 4465 require AFP set to *YES?If the output is plain and simple text only, the AFP parameter in the de...02-18-2006
287Epson Type A or Type B interface?The I-O 8310 is designed for an Epson printer with an Epson defined type...02-17-2006
303What are the switch settings for my TxP+, TxS+ or TxPLite?The following link will show switch settings for the TxP+, TxPLite and T...02-17-2006
322Multiple bin support for dot matrix printersHow do I get my matrix printer to feed from multiple paper bins? I-O'...02-15-2006
3248219SA Switch SettingsThe following link will define the various switch settings available on ...02-18-2006
3278215 Switch SettingsThe following link will define the various switch settings for the I-O 8...02-17-2006
334Why does my outque change back to system defaults? The Telnet (TN5250e) protocol auto configures devices and when devices...03-07-2007
345HP printer pauses between pages of a given jobA customer with an HP4000N and an I-O TxP+ reported a slight printer pau...02-17-2006
3494465 firmware update correction to instructionsIn the 4465 manual, specifically Appendix C, there is an error in the fi...02-17-2006
357TxP+, TxPLite & TxS+ power supply specificationsThe specs for the common power supplies used by the TxP+, TxPLite and Tx...03-06-2006
372Printing to a IPDS 5224 via LANRPCSome old...04-19-2006
382What printers will a 4465 drive ? The I-O 4465 Print Box will support any parallel printer that supports...04-27-2006
3884020 / 4030 Switch Settings The following link will show the, various, switch settings for the 402...08-28-2006
397Data not aligning on the form properly when printing through the 4465 10-25-2006
404Zebra label printer receives data but nothing prints Zebra label printers use a specific language called ZPL to print a lab...12-18-2006