| Article #25 - Changing my IP address scheme. |
|---|
| Updated:02-17-2006 - Views: 534 |
| Why, when I am changing my IP addressing scheme, can I no longer see my I-O PrintServer (PS) with the Configuration Utility (CU).
***** Solution ***** Restoring Factory Defaults will most always resolve this issue,(realize restoring factory defaults will clear any and all user selected values currently in the PS), however there are occasions when a hub or switch may be blocking the UDP broadcast. These instances may require using a crossover cable. This requires connecting the I-O PS to the NIC card in a stand-alone PC with CU installed. Start CU and make the desired changes. Save and exit as normal. The PS now has the desired IP address and can be put back on the LAN. Also, the first two octets of the PS IP address must match the IP address of the PC's NIC card in order for the CU to see the PS'er. |
|
Use the form below to submit a comment on this article for inclusion into the knowledgebase. End-users are welcome to submit articles relating to any category in the knowledgebase. Submit a comment in response to the knowledgebase article. Please keep the response professional, the content may be modified by the Knowledgebase Administrator. Before posting the comment will be reviewed and may be edited for brevity, structure and content. |