| Article #282 - How do I turn QAUTOCFG on? |
|---|
| Updated:02-17-2006 - Views: 292 |
| The AS/400 system value, QAUTOCFG, is either on or off.
Display the current setting by entering the following command on an AS/400 command line: dspsysval qautocfg (press enter). To change this value you must first have proper authority on the AS/400. Once the user ID being used has proper authority qautocfg is changed as follows: On an AS/400 command line type: chgsysval qautocfg and then press F4, do not press enter. On the New Value line the acceptable values are: '1' (with the apostrophes) to turn autoconfig on. '0' (with the apostrophes) to turn autoconfig off. Press enter after typing the desired value. |
|
Use the form below to submit a comment on this article for inclusion into the knowledgebase. End-users are welcome to submit articles relating to any category in the knowledgebase. Submit a comment in response to the knowledgebase article. Please keep the response professional, the content may be modified by the Knowledgebase Administrator. Before posting the comment will be reviewed and may be edited for brevity, structure and content. |