| Articles for Remote Controllers |
|---|
| # | Title | Summary | Updated |
|---|
| 59 | My 8x94 controller won't boot. What can I do? | If there is no disk error light on the disk drive check the MPIC card LE... | 02-10-2006 |
| 63 | What modems, Sync or ASync, can I use with my 8x94 remote controll | I-O 8x94 controllers REQUIRE Sync modem connections. The 8x94 controller... | 02-18-2006 |
| 71 | Can Windows print to an ASCII printer connected to a terminal on a 5794ip? | Can I print LAN jobs to my ASCII printer connected to the parallel port ... | 02-17-2006 |
| 78 | 5794IP Controller and Twist Pair Cabling | Can I connect existing Twinax devices using Twisted Pair cabling to the ... | 02-16-2006 |
| 96 | Does my 8494 Twinax card support 8 or 14 devices? | How do I know if the Twinax card in my I-O 8494 controller supports 8 or... | 02-12-2006 |
| 101 | Can I mix Twinax and Twisted-Pair on my 5794ip? | Using a Star Panel, can I mix Twinax attached devices with balan and twi... | 02-18-2006 |
| 111 | Description of the 8494 front panel LED's | Descriptions for the LED's on the 8494's front panel can be found online... | 02-17-2006 |
| 113 | Is my 3487 display supported on the 5794ip? | No. InfoWindow terminals are not supported by the 5794ip controller.... | 02-18-2006 |
| 114 | Is the Twinax portion of my 5794ip working correctly? |
How can I tell if the Twinax portion of my 5794ip is working correctly... | 10-25-2006 |
| 115 | How does the 5794ip print a self-test? | How can I print a self-test from the 5794ip Controller? Will this self-t... | 02-18-2006 |
| 123 | Can I get a data capture from the 5794ip Controller? |
NO, the Data Capture feature is driven by I-O's printer emulation and ... | 10-25-2006 |
| 124 | External devices intermittently losing power | My external print server / ip controller / thin client display / is inte... | 02-13-2006 |
| 219 | Can I make copies of my 8x94 disks on my PC? | Yes by using the diskcopy command.
c:diskcopy a: a:
*Note: 8394E d... | 02-17-2006 |
| 220 | Ethernet or TokenRing in my 8394E or 8394Ei? | Can I install an ethernet/tokenring card in my 8394E/8394EI ?
The 839... | 02-17-2006 |
| 222 | Will my 8394Ei or 8494 controller autoconfig devices? | Does the 8394EI/8494 autoconfigure terminals and printers ?
Yes. Sof... | 02-18-2006 |
| 223 | What does the flashing ready light on my 8x94 controller mean ? | When the ready light is flashing the DTR light will not be on and the co... | 02-12-2006 |
| 224 | What do I do if the Disk Error light is on ? | What do I do if the Disk Error light is on?
There are multiple cause... | 02-18-2006 |
| 225 | Does the 8394EI/8494 support TCP/IP ? | Does the 8394EI or the 8494 support TCP/IP ?
No they do not. The cont... | 02-18-2006 |
| 226 | What does it mean if the Comunication (Comm) light is not on? | What does it mean if the Com line light is not coming on ?
The Com li... | 02-17-2006 |
| 227 | Does line type matter to the controller configuration ? | If I am connected with a dedicated or dialup line, do I need to change t... | 02-18-2006 |
| 228 | What are the 8394Ei and 8494 software differences ??? | What are the differences between the 8394EI software and the 8494 softwa... | 02-13-2006 |
| 229 | Can I use the twinax cards from my 8394EI in my 8494? | Yes the twinax cards are compatible between the 8394E, 8394EI and 8494.
... | 02-17-2006 |
| 230 | Does the 8394EI or 8494 work with frame relay, T1 lines? | Does the 8394EI or 8494 work with frame relay, T1 lines ?
Yes as lon... | 02-17-2006 |
| 231 | Can I switch cables from RS232 to V.35 or V.35 to RS232 ? | The only change is to change the cable. There are no changes required to... | 02-18-2006 |
| 291 | How can I give specific names to devices on the 5794ip controller ? | I want to name my displays and/or printers a specific name, but when I s... | 02-16-2006 |
| 295 | What are the port numbers for IPDS printers on the 5794ip controller? | Port numbers used in defining an IPDS printer to the AS/400 with the crt... | 02-13-2006 |
| 332 | Should my line description value be half or full duplex? | I-O recommends using half duplex under all conditions since half duplex ... | 02-13-2006 |
| 337 | What Twinax cable distance is supported on the 5794ip? | Following IBM cable specifications, when using Twinax cable in a daisy-c... | 02-18-2006 |
| 356 | IPDS job is ending the writer of an 8394ei configured ipds printer. | If an ipds job is causing your writer to end, try changing the Advanced ... | 03-09-2006 |
| 366 | Why do all devices connected to the 5794ip controller keep going down? | All devices configured on the 5794ip controller using the Anynet protoco... | 03-28-2006 |
| 373 | Where to find the current revision of the configuration utility. | The current revision of the configuration utility can be downloaded from... | 04-03-2006 |
| 389 | Does the 5795ip controller support Client Access or PC Support? |
The 5794ip controller was designed to support twinax attached terminal... | 10-24-2006 |
| 467 | 5794ip & Printer Lanugage Support | The 5794ip controller passes through the language from the host to the p... | 12-20-2007 |